Empowering the Future, Connecting All Things

VD40 Extended

Based on the VD40 base version, this model is equipped with a relay, adding the remote fuel and power cutoff function.

Email:

gpsxs168@gmail.com

WhatsApp:

+86-13398211588

Product Features

4G built-in antenna,high integration design

9-90V wide voltage,real-time location tracking,track playback

Vibration alarm,Over-speed alarm,Entry and exit electronic fence alarm

Vehicle engine start and turning off detection

Easy installation,no need to press the power button,it will work immediately after power on

Built-in backup battery,prompt alarm will be triggered when being illegal removal

The device can be connected to a relay to realize remote oil and power cutoff function

GPS+BDS+LBS Multiple positioning

Production Wiring Diagram

Product Parameters

Specification	Parameters
Size	793416mm
Built-in battery	150mAH(3.7V)
Operating temperature	-20° C to+60°C
Storage temperature	-20° C to+70° C
Sensor	Precision Vibration Sensor
Frequency band	Southeast Asia Edition 4G: FDD: B1/B3/B5/B8 TDD: B34/B38/B39/B40/B41
	South American Version 4+2G:FDD: B1/B2/B3/B4/B5/B7/B8/B28/B66GSM/GPRS/EDGE: 850/900/1800/1900 MHz
	European Version 4+2G: FDD B1/B3/B5/B7/B8/B20 GSM 900/1800MHz
Root Mean Squares Error (RMSE)	S degrees
Dynamic output range	-15~-108dbm
Receive sensitivity	-107dbm
Maximum frequency deviation	±0.1ppm
Sensitivity	Cold start:-145 dbm Hot Start:-156 dbm warm start:-145 dbm navigation:-160 dbm track:-162 dbm
First position time	Cold start:32 seconds on average
GSM antenna	built-in
GPS antenna	built-in
LED indicator	power, indicating status
Transfer Protocol	TCP
Power detection	Upload alarm information when the main power is disconnected
Data upload	Update GPS data in real time and support customization
Geo fence	TBD
Driving behavior detection	When the vehicle speed exceeds the set speed,the device will upload the over-speed alarm
GPS data	Real-time location updates
Vibration alarm	Vehicle vibration report in armed state

Basic Product Function

Use	Function	Description
GPS tracking and locating	4G network	Supporting 4G network,l secondeficient transmission. faster and moreaccurate
	Timing tracking	Reporting positioning information such as latitude and longitude according to the set interval
	Over-speed alarm	The tracker will send an alarm to your mobile phone when driving speed is too fast
	Vibration alarm	Built-in vibration sensor, when the vehicle vibrate continuously, the device will immediately send an alarm information
	Geo fence	when the driving range of the car exceeds the specified area, an alarm message will be sent to the platform
	Historical track	The platform can play back of history driving route, including speed, direction and stay time, etc.
	Remote power outage	When the vehicle is being illegal operation or being theft, users can remotely cut off the oil and electricity through the computer or mobile APP
	Fleet management	One account can monitor multiple devices, or one device can be monitored by multiple accounts

Analysis and Troubleshoot of Common Problems

If the yellow light and blue light of this product are always on and do not flash, it means that the device is normal online positioning. In case of flashing, please follow the following steps to analyze and troubleshoot.

Trouble	Analysis	Solution
Blue light flashing slowly	Whether to use the device in areas with poor GPS signals, such as near high-rise buildings or underground parking lots	Drive the vehicle to the position with good signal and reinstall the device
	Whether the front windshield of the vehicle is pasted with metal heat insulation film,which affects the signal reception	If there is a film, use the device in another vehicle to test whether the blue light is always on. If there is no problem in testing on other vehicles without film,it is caused by the film of the vehicle
	Whether there are shields or signal jammers on or around the vehicle	If there is a shield or signal jammer, remove the shield or signal jammer and try to reinstall the device
Blue light flashing quickly	Chip failure	Return to factory for maintenance
Yellow light flashing quickly	Whether the SIM card is installed properly	Make sure the SIM card is installed correctly
Yellow light flashing quickly	Whetherthe metal surface of SIM card has dirt or poor connect	Wipe the metal chip surface with a clean cloth or repeatedly insert and remove the card several times
Yellow light flashing slowly	Whether the vehicle is in a place without network,such as an underground parking lot	Please drive the vehicle to a place with good network signal and try to reinstall the device
	Whether the server platform is normal	Ask background management whether the platform server is working normally
	Whether the SIM card status is normal	Check whether the card status is normal through the SIM card query platform
	Whether there are shields or signal jammers on or around the vehicle	If there is a shield or signal jammer, remove the shield or signal jammer and try to reinstall the device

Product Precautions

Please pay attention to waterproof of electronic products.
Please insert the SIM card before installation to ensure that the SIM card has no password,otherwise the device will not work properly.
The USB port on the terminal device is dedicated for factory testing,and it is not a device charging port.Do not use it for charging or other purposes.
There must be no substance absorbing electromagnetic wave(such as metal,explosion-proof insulating film)above the installation position.
Do not touch the device with liquid or operate it with wet hands.
Do not put the device into fire.
The device may not work when the temperature is lower than-20℃or higher than+60℃.
When the vehicle is in the underground parking lot,tunnel or garage,the positioning signal will be affected.And there may be blind areas of communication network signals,which may cause the device to be unable to monitor;When the vehicle drives out of the above area,the device will automatically resume normal operation.
In case of abnormal conditions,please do not repair by yourself.The manufacturer shall not be liable for any damage caused by connecting non original accessories or unplugging the connections between components.
This product is an auxiliary product for safe driving,and any loss caused by failure or information loss has nothing to do with our company.
This product has passed the international CE certification,but because of the complex electromagnetic environment in the vehicle,this product may have electromagnetic interference with the electrical equipment in some vehicles.
Do not install or operate this product when the vehicle is running.
Do not connect the device to uninterruptible power supply without authorization,or it may cause vehicle or product failure.Please consult with a professional about installation.
Do not shock or throw the product violently,so as to avoid damaging the product,which may lead to malfunction or failure to use.8
The temperature range for normal use of this product is-20℃to 65℃.Exceeding this temperature range may lead to product failure,on fire or explosion.

Factory Advantages

Xushen Technology is a comprehensive IoT solution provider that integrates research and development, production, sales, and service

Complete Solutions：From hardware terminals to SaaS & Big Data platforms

Customization (OEM/ODM)：Tailor-made hardware & software for industry needs

Cutting-Edge Technology：AI, Big Data, Cloud Computing integration

Trusted Partner：Reliable service & global market experience

FACTORY ENVIRONMENT

The company has covered a complete product line and technical reserves of intelligent hardware, SaaS platform, management system, and big data platform in various sub fields of vehicle networking front-end, back-end, and industry applications. It can provide end-to-end comprehensive solutions from vehicle terminals (series products), industry monitoring and positioning systems (single and dual-mode), to applications and other levels.

Front Desk

Technology Center

Marketing Department

Company Front Desk Photo

Company Showroom

DIP Process Section

SMT Workshop

Testing Section

Electronic Warehouse

Overseas Breakthrough: A New Journey in the Satellite Positioning Market

With the accumulated technical strength and industry resources in satellite communication services and other businesses, the team aims to seize opportunities in the overseas satellite positioning market and embark on a new chapter of global layout. Based on the experience of members in technology research and supply chain management, we integrate the advantages of domestic electronic components, software and hardware research and development, adapt to the needs of overseas markets for satellite positioning services in terms of accuracy, coverage, and multi scenario applications, build a complete system from positioning system research and development, hardware matching to operation and maintenance services, attempt to break the existing satellite positioning service pattern in overseas markets, and use the innovative ability of the technical team to explore the international business map of the company and seize new tracks in the global wave of network technology services.