VD42S
VD42S
VD42S
VD42S
VD42S
+
  • VD42S
  • VD42S
  • VD42S
  • VD42S
  • VD42S

VD42S

This product is designed for vehicle security management. It features continuous positioning, track playback, status monitoring, and tamper alerts. With its rugged design and multi-mode positioning technology, it ensures the security of your vehicle assets in various challenging environments.

If you need customized products,  Contact US !

Tag list: VD42S

Category:


Product Description

Product Features

4G built-in antenna, high integration design
Real-time positioning tracking, trajectory playback
IP68 waterproof design
Vehicle engine start and turning off detection
Built-in backup battery, prompt alarm will be triggered when beingillegal removal
GPS+BDS+LBS Multiple positioning

Product Parameters

Specification

Parameters

Size

90*55*22mm

Built-in battery

150mAH(3.7V)

Operating temperature

-20℃-75℃

Storage temperature

-30'C-80'℃

Sensor

Precision Vibration Sensor

Frequency band

Southeast Asia Edition 4G+2G:FDD: B1/B3/B5/B8 TDD: B34/B38/B39/B40/B41 GSM: 850/900/1800/1900 MHz

South American Version 4+2G: FDD: B1/B2/B3/B4/B5/B7/B8/B28/B66 GSM/GPRS/EDGE: 850/900/1800/1900 MHz

European Version 4+2G: FDD B1/B3/B5/B7/B8/B20  GSM 900/1800MHz

Root Mean Squares Error
(RMSE)

S degrees

Dynamic output range

-15~-108dbm

Receive sensitivity

-107dbm

Maximum frequency deviation

±0.1ppm

Sensitivity

Cold start:-145 dbm
Hot Start:-156 dbm
warm start:-145 dbm
navigation:-160 dbm
track:-162 dbm

First position time

Cold start:32 seconds on average

GSM antenna

built-in

GPS antenna

built-in

LED indicator

power, indicating status

Transfer Protocol

TCP

Power detection

Upload alarm information when the main power is disconnected

Data upload

Update GPS data in real time and support customization

Geo fence

TBD

Driving behavior detection

When the vehicle speed exceeds the set speed,the device will upload the over-speed alarm

GPS data

Real-time location updates

Vibration alarm

Vehicle vibration report in armed state

Basic Product Function

Use

Function

Description

GPS tracking and locating

4G networkSupporting 4G network,l secondeficient  transmission. faster and moreaccurate
Timing trackingReporting positioning information such as latitude and longitude according to the set interval
Over-speed alarmThe tracker will send an alarm to your mobile phone when driving speed is too fast
Vibration alarmBuilt-in vibration sensor, when the vehicle vibrate continuously, the device will immediately send an alarm information
Geo fencewhen the driving range of the car exceeds the specified area, an alarm message will be sent to the platform
Historical trackThe platform can play back of history driving route, including speed, direction and stay time, etc.
Remote power outageWhen the vehicle is being illegal operation or being theft, users can remotely cut off the oil and electricity through the computer or mobile APP
Fleet managementOne account can monitor multiple devices, or one device can be monitored by multiple accounts

Analysis and Troubleshoot of Common Problems

If the yellow light and blue light of this product are always on and do not flash, it means that the device is normal online positioning. In case of flashing, please follow the following steps to analyze and troubleshoot.

Trouble  

Analysis

Solution

Blue light flashing slowly

Whether to use the device in areas with poor GPS signals, such as near high-rise buildings or underground parking lotsDrive the vehicle to the position with good signal and reinstall the device
Whether the front windshield of the vehicle is pasted with metal heat insulation film, which affects the signal receptionIf there is a film, use the device in another vehicle to test whether the blue light is always on. If there is no problem in testing on other vehicles without film,it is caused by the film of the vehicle
Whether there are shields or signal jammers on or around the vehicleIf there is a shield or signal jammer, remove the shield or signal jammer and try to reinstall the device

Blue light flashing quickly

Chip failureReturn to factory for maintenance

Yellow light flashing quickly

Whether the SIM card is installed properlyMake sure the SIM card is installed correctly
Whetherthe metal surface of SIM card has dirt or poor connectWipe the metal chip surface with a clean cloth or repeatedly insert and remove the card several times

Yellow light flashing slowly

Whether the vehicle is in a place without network,such as an underground parking lotPlease drive the vehicle to a place with good network signal and try to reinstall the device
Whether the server platform is normalAsk background management whether the platform server is working normally
Whether the SIM card status is normalCheck whether the card status is normal through the SIM card query platform
Whether there are shields or signal jammers on or around the vehicleIf there is a shield or signal jammer, remove the shield or signal jammer and try to reinstall the device

Product Precautions

  1. Please pay attention to waterproof of electronic products.
  2. Please insert the SIM card before installation to ensure that the SIM card has no password,otherwise the device will not work properly.
  3. The USB port on the terminal device is dedicated for factory testing,and it is not a device charging port.Do not use it for charging or other purposes.
  4. There must be no substance absorbing electromagnetic wave(such as metal,explosion-proof insulating film)above the installation position.
  5. Do not touch the device with liquid or operate it with wet hands.
  6. Do not put the device into fire.
  7. The device may not work when the temperature is lower than-20℃or higher than+60℃.
  8. When the vehicle is in the underground parking lot,tunnel or garage,the positioning signal will be affected.And there may be blind areas of communication network signals,which may cause the device to be unable to monitor;When the vehicle drives out of the above area,the device will automatically resume normal operation.
  9. In case of abnormal conditions,please do not repair by yourself.The manufacturer shall not be liable for any damage caused by connecting non original accessories or unplugging the connections between components.
  10. This product is an auxiliary product for safe driving,and any loss caused by failure or information loss has nothing to do with our company.
  11. This product has passed the international CE certification,but because of the complex electromagnetic environment in the vehicle,this product may have electromagnetic interference with the electrical equipment in some vehicles.
  12. Do not install or operate this product when the vehicle is running.
  13. Do not connect the device to uninterruptible power supply without authorization,or it may cause vehicle or product failure.Please consult with a professional about installation.
  14. Do not shock or throw the product violently,so as to avoid damaging the product,which may lead to malfunction or failure to use.8
  15. The temperature range for normal use of this product is-20℃to 65℃.Exceeding this temperature range may lead to product failure,on fire or explosion.

Factory Advantages

Xushen Technology is a comprehensive IoT solution provider that integrates research and development, production, sales, and service

Complete Solutions:From hardware terminals to SaaS & Big Data platforms

Customization (OEM/ODM):Tailor-made hardware & software for industry needs

Cutting-Edge Technology:AI, Big Data, Cloud Computing integration

Trusted Partner:Reliable service & global market experience

FACTORY ENVIRONMENT

The company has covered a complete product line and technical reserves of intelligent hardware, SaaS platform, management system, and big data platform in various sub fields of vehicle networking front-end, back-end, and industry applications. It can provide end-to-end comprehensive solutions from vehicle terminals (series products), industry monitoring and positioning systems (single and dual-mode), to applications and other levels.

Front Desk

Front Desk

Technology Center

Technology Center

Marketing Department

Marketing Department

Company Front Desk Photo

Company Front Desk Photo

Company Showroom

Company Showroom

DIP Process Section

DIP Process Section

SMT Workshop

SMT Workshop

Testing Section

Testing Section

Electronic Warehouse

Electronic Warehouse

Overseas Breakthrough: A New Journey in the Satellite Positioning Market

With the accumulated technical strength and industry resources in satellite communication services and other businesses, the team aims to seize opportunities in the overseas satellite positioning market and embark on a new chapter of global layout. Based on the experience of members in technology research and supply chain management, we integrate the advantages of domestic electronic components, software and hardware research and development, adapt to the needs of overseas markets for satellite positioning services in terms of accuracy, coverage, and multi scenario applications, build a complete system from positioning system research and development, hardware matching to operation and maintenance services, attempt to break the existing satellite positioning service pattern in overseas markets, and use the innovative ability of the technical team to explore the international business map of the company and seize new tracks in the global wave of network technology services.

Team Building - 02

Team Building - 02

Team Building - 03

Team Building - 03

Team Building - 04

Team Building - 04

Team Building - 05

Team Building - 05

Team Building - 06

Team Building - 06

Team Building - 08

Team Building - 08

Quick Quote

Skip the queue! Get tailored solutions within 24h

Share to

Related Products

VE200AS

Based on the VE100 Base model, this product features an upgraded 20000mAh battery capacity, delivering extended endurance to ensure long-term stable operation

VE100AS

Based on the VE60A model, this product features an upgraded 10000mAh battery capacity, delivering extended endurance to ensure long-term stable operation

VE100 Waterproof

Based on the VE100 base version, this product adds waterproof functionality, enabling reliable operation in damp environments with sustained stability

VE100 Magnetic

Based on the VE100 Waterproof Edition, this product adds a magnetic adsorption function, enabling cable-free installation. It can be deployed quickly and securely with magnetic attachment, offering flexibility and convenience

Request Quote

Let us know your requirement. We will connect best products with you.

SUBMIT